You are here: / Home / Bamboo Machine News

Bamboo Requirements for Bamboo Stick Making

Views : 1493
Update time : 2016-04-20 14:47:33

BAMBOO REQUIREMENTS

-Written by Angel Zhou 0086 186 5710 6860

Besta Bamboo Machine Co., Limited.

BAMBOO REREQUIRMENTS FOR MAKING BAMBOO STICKS

(BASIC REQUIREMENTS) BESTA

The Inner Hole of the Raw Bamboo

The diameter should be bigger than 3 CM.

Strip Thickness After Splitting

Less than 15 mm (Generally)

Thickness Process Capability

(MZP-3 Fixed Width Slicer)

Less than 15 mm (Generally)

Width Process Capability

(MZP-3 Fixed Width Slicer)

In China, it will be less than 15mm.

If you have special needs, we can design the machine for processing the strip with WIDTH 20mm.

Before Putting into MBZS-5

Bamboo Wool Slicer

If you wish to make 1.5 mm round bamboo stick, the strip before feeding into stick slicing machine should be 3.5 mm.

The strip with 2.5 mm thickness can also make 1.5mm diameter round bamboo sticks, but it is depending on local bamboo characteristics. There are no strict requirements.

For Some species which has the characteristics of easily broken in the BAMBOO KNOT PART,you can also consider our model: MBZS-2 or MBZS-2A Bamboo Wool Slicer.

If you are not sure about your bamboo characteristics, we kindly suggest you to send us bamboo or bamboo strip sample to us. ,

Contact US: Angel Zhou

Mobile:0086-186-5710-6860(WAHTSAPP/WECHAT)

Email:angelzhou1224@gmail.comwww.bestachina.com

http://www.youtube.com/watch?v=7GlQXVUkpwg